Deck condition & insulation
We assess the existing covering and supporting deck for damp, softness or damage. The proposal identifies deck repairs or replacement and any insulation work; fitting a new covering does not make an unsuitable deck sound.

A clean, durable flat-roof system for extensions, garages, porches and other low-pitched areas.
Installed by our Worcester-based team across the West Midlands. See our coverage.
Free home visit No-obligation quotation
EPDM rubber roofing uses a flexible single-ply membrane, with large sheets helping reduce joins where the roof layout allows. We prepare the roof deck properly, form neat edges and outlets, and finish every detail for dependable long-term protection.
COMPARE YOUR ROOF COVERING
Replacing an ageing felt roof? EPDM offers a flexible, low-maintenance alternative with fewer joints on many simple roofs. Here is how the two approaches compare.
| What matters | THE ERA OPTIONEPDM rubber roofing | THE TRADITIONAL APPROACHBuilt-up felt roofing |
|---|---|---|
| Waterproofing & joints | Large rubber sheets can cover many simple roofs in one piece, reducing joints across the main roof area. Edges, outlets and rooflights still need careful detailing. | Built up from overlapping felt strips, usually in multiple layers. Each lap and junction needs to be correctly bonded and maintained. |
| Flexibility | A flexible rubber membrane that accommodates normal building movement and temperature changes. | Older bitumen felt can become harder and more brittle with age. Modern modified-bitumen systems offer improved flexibility. |
| Sun & weather | EPDM has strong natural resistance to UV and ozone, without needing a protective mineral surface. | Typically relies on a mineral finish or other specified surface protection to shield the bitumen from sunlight. |
| Installation | Cold-bonded with compatible adhesives, so no naked flame is needed to install the membrane. | Traditional systems may use hot bitumen or torch application. Cold-bonded and self-adhesive felt systems are also available. |
| Care & maintenance | Generally low maintenance. Check the roof periodically and keep gutters and outlets clear; inspect details after severe weather. | Check drainage, surface protection and overlaps. Lifting laps, blisters or cracking on an older roof need attention. |
| Repairs | Local damage can often be repaired with compatible EPDM patches and detailing products, after assessing the surrounding roof. | Local repairs may be possible with compatible bitumen products. The condition of the existing layers and deck matters. |
| Long-term performance | A durable option for a replacement flat roof when the deck, drainage and finishing details are properly designed and installed. | Performance depends on the felt specification, installation and upkeep. Widespread deterioration may call for replacement rather than repeated patching. |
This comparison focuses on traditional felt roofs, rather than every modern high-performance felt system. Neither covering fixes a damaged deck or poor drainage. Suitability and service life depend on the complete roof build-up, installation and care.
MAKE AN INFORMED CHOICE
EPDM is a flexible rubber membrane used for suitable flat and low-pitched roofs. Our installations in Worcester and Claines show roof renewal and, where suitable, roof lanterns. The membrane is one part of a complete roof build-up.
We assess the existing covering and supporting deck for damp, softness or damage. The proposal identifies deck repairs or replacement and any insulation work; fitting a new covering does not make an unsuitable deck sound.
The roof needs a planned route for rainwater. Edges, upstands, wall junctions and penetrations are detailed together with the drainage. EPDM can use large sheets, but joins may be necessary depending on the roof size and layout.
A lantern needs an appropriate supporting opening, upstand and waterproofing detail. Consider glazing, heat gain and ventilation too. The Claines project includes rain-sensor opening sections; these features depend on the selected lantern.
At handover we explain drainage checks and safe maintenance. Keep outlets free of debris and avoid unnecessary roof traffic. ERA provides a 10-year customer works guarantee for the roof products and installation.
PLAN THE DETAILS
A flat-roof proposal needs to consider the existing structure, deck, drainage and junctions as well as the membrane. These are the details we discuss at your survey.
Assess the old covering and supporting deck before agreeing what can remain. Include any deck replacement or repair allowances in the proposed scope.
Discuss the roof construction and whether insulation work is part of your project. The build-up, available height and junctions need to be considered together.
Review drainage routes, outlets, roof edges and wall junctions. Ask how these details will be finished and which guttering work is included.
Plan any rooflight openings and their junctions before installation. At handover, confirm care advice, access limitations and the product and workmanship cover for the agreed system.
Fantastic job, both lads work hard from start to finish. They were prompt. They cleaned up after they finished . A job well done and will definitely give them more jobs in the future and recommend them to my friends. Thank you
An experienced installer listens, measures and gives practical advice at your property.
Work directly with our installers to choose suitable products and agree the details.
A clear written quotation, with the scope explained and time to decide.
Professional installers carry out the work, keep you informed and stay available for aftercare.
PLAN WITH CONFIDENCE
Describe leaks and visible damage. The deck, drainage and junctions need assessment before deciding whether a repair or renewal is appropriate.
Agree access, removal, deck work, waterproofing and finishing. Weather and the condition found beneath the old covering affect the sequence.
We confirm the expected duration for your project once its size, access and condition are understood. Ask what is included in protection, making good and waste removal.
See the enquiry-to-installation journey →Avoid unnecessary roof traffic. Ask for safe checks of outlets and roof junctions if you notice pooling or a leak.
ERA provides a 10-year customer works guarantee, with specific 10-, 5- and 2-year cover for windows and doors.
Guarantee details and aftercare support →Roof size, the existing deck, drainage, edge details, access and any insulation or rooflight work influence the price.
Your written quotation sets out the agreed work and price. You can ask questions before deciding, with no obligation.
BEFORE YOU DECIDE
Choose with a clearer idea of the options and the next step.
More advice for your projectWe need to assess the existing covering, roof deck, edges and drainage before recommending the work. Tell us about any leaks and attach photos taken from a safe position.
A roof lantern or roof light needs to be considered with the supporting structure, roof layout and waterproofing details. Tell us if you want daylight or opening ventilation so we can discuss suitable options.
An overall photograph, the approximate roof size and a note of any leaks or access restrictions are helpful. You do not need to climb onto the roof to request advice.
Large sheets can reduce the number of joins, but roof size, shape and details may require seams. The important point is a correctly prepared deck and appropriate membrane, edge, junction and drainage detailing for your roof.
WORCESTER BASED
We serve Worcester, Malvern, Droitwich, Pershore, Kidderminster, Bromsgrove, Redditch, Evesham and surrounding communities, with installations across the wider West Midlands. Share your postcode so we can discuss a visit for your project.
Explore our coverage & local installationsYou do not need a finished specification. Tell us what you want to improve, add photos if helpful and choose how you would prefer us to contact you. Your enquiry comes directly to the ERA team.
Discuss your projectWe protect the surrounding areas, pay attention to the finishing details and explain how to care for your installation. If a question comes up afterwards, our team is here to help.
YOUR NEXT STEP
Tell us what you have in mind. We’ll help you compare suitable options and agree the next step for your home.
Free home visit No-obligation quotation

Serving the West Midlands, including Worcester, Birmingham, Wolverhampton, Coventry, the Black Country and surrounding counties.